2024-03-11

Application of CMD Membrane Dryer

membrane typeThe dryer is a new type of drying device, its basic working principle Yes Use Compressed air The difference in the permeability of each component to the membrane,Implement compression the separation of steam and water in the air,permeable membrane material With the function of water molecule penetration and diffusion, both ends Presence concentration Different gas partial pressures, gasMolecules can pass through the osmotic membranediffusion,thereby obtaining a dry CompressionAir.

Drying membrane groupWide range of applications,Performancestability,high reliability, without power supply, installationFlexible and convenient. UserCanAccording to gasDemandMatch different types of membrane groups to meet the needs of different air quality.

Characteristics of compressed air drying membrane group

1High performance hollow fiber membrane

Unique spiral winding technology to minimize volume and maximize efficiency

Can constantly reduce the pressure dew point, can keep the relative humidity

2The physical principle of the drying process, economic and reliable safety

Well-designed aluminum housing and blowback vent

A variety of models, suitable for a wide range of compressed air flow

Work according to physical principles, almost no noise

According to the polymer permeable membrane material with water molecules penetration diffusion drying, explosion-proof, insensitive to temperature, climate change will not affect the drying effect

3The installation method is simple and convenient, free from maintenance

No need to connect the power supply, save power

Components do not need to be repaired, saving maintenance troubles

Small size for mobile devices and small spaces

Independent of a specific installation location, can be integrated on existing equipment under certain conditions

Oil in compressed air,Hazards of water
The air compressor system produces two products: compressed air and condensate. Both products are contaminated with particulate impurities from the environment and the system. Therefore, the pipeline of the air pressure system needs to install a filter.Purification equipment such as dryers remove these impurities from the compressed air. If the same compressed air contains a lot of condensate, it will eventually have a serious impact on the operation of your system equipment. For example, it may not work normally due to freezing in winter or cause product quality problems due to condensate in compressed air..

Product basic parameters andNote:

Air dryer shell: aluminum alloy

Air dryer end cover material: nylon/aluminum alloy

Air dryer installation direction: unlimited

Maximum operating temperature:60℃

Maximum working pressure:12.5barg（180psi)

Typical Pressure Drop:0.2-0.5barg（3 to 7 dogs)

Filtration requirements (installed in the compressorExportback):1 micron and0.01micron coalescer

The front end of the membrane dryer needs to be added with a first-stage precision filter of compressed air to ensure the filtration accuracy.0.01 μm, in the case of more impurity particles and water molecules, the optional three-stage filter, usually equipped with: steam separator1μmFilter0.01μmFilter, which can ensure that high-quality compressed air is provided to the gas point.

Dryer, compressed air, drying, filter, equipment, system, CMD membrane dryer, membrane dryer

Next Page

Application of proportion-air QB2 electrical proportional valve in baking room safe